Notice
This notice has been superseded. Replaced by a later version. It remains on the board and may still be cited.
Instruction to competitors for return of equipment
- Posted
Please check your equipment before the final day to avoid delays and time spent looking for missing parts during equipment inspection. Thank you for your help.
Board and accessories
Rinse your board
Leave the footstraps attached to the board. Check that all 6 footstraps are ready to be returned
Remove the daggerboard case
Make sure you have the Allen key
Remove the fin and screw both screws back into the fin
Remove the mast foot joint
Rig
On returning to the beach after the last race, rinse your rig and leave it fully rigged for sail inspection. Do not dismantle it until the inspection is complete.
After inspection, roll up the sail and place it in its bag.
Separate the mast into its two sections and remove the tape from the downhaul rope attachment.
Check that you have all original ropes, including the uphaul.
If you used your own rope for the front-end lever, refit the original rope.
Remove the harness-line tape from the boom.